ZEN DELUX BC SYSTEM, STAINLESS STEEL BACKPLATE,

Applying advanced technology for a new dimension in sports diving

Perfect position

The wing has been carefully designed to achieve perfect positioning in water with great comfort at the surface.

High lift and minimized drag

The gas position in the wing ensures minimal drag and no unwanted dead air spaces.

Unique NX series harness

NX harness is easy to put on and take off without compromising stability, comfort and security.

Incredibly tough

The double-shell Cordura wing is extremely durable, perfect for wreck diving.

Compatible with doubles

Great flexibility, use your NX Series harness with doubles just by replacing the wing.

A STEP CHANGE IN BCD APPLICATION

Jump on any dive boat in the last 20 years and every BCD you see will be a slight variation on a theme. The NX ZEN is the result of our passion to break from that tradition, from what works, into what performs at a previously unheard-of level.

Deconstructing traditional designs, bringing XDEEP’s technical diving experience and expertise, led to a step-change in BCD design and application.

BE AT ONE WITH YOUR EQUIPMENT

The NX ZEN is so named for a reason; that feeling of being ‘at one’ with the world that diving brings. Advances in materials technology, in diving design and our ability to apply modern engineering concepts created a dive system that delivered on our priorities.

A stable, comfortable and ergonomic BCD that is truly ZEN.

LESS effort MORE comfort and safety

To truly be at one with your equipment, your weight system must be perfectly balanced, be secure and easy to configure and use. The modular weight system in the NX series means you can confine your weight belt to history.

Tailor your weight distribution for the diving you are doing. From a couple of kilos needed in the warm sun, to the extra lead needed in cold water diving, you can select the pockets that best suit your needs.

Less is more

The ZEN wing is deliberately narrow so that it does not protrude from the side of your tank. This brings advantages in enhancing your buoyancy control, in reducing any entanglement hazards and in significantly reducing drag. As we reduce drag we usually improve our gas consumption, enabling longer and safer dives.

ZEN wing provides 19kg of lift, while its size is comparable to classic wings with 17kg of lift.

Smaller upper wing section

The compact engineering of the NX series inflator has allowed a reduction in the required size of the upper part of the wing. This results in a position at the surface that lifts you high out of the water and ensures the lift is in the right place when submerged.

Precise control of gas movement

Traditional inflation systems are mounted on the side, so that as gas is injected it can disturb trim if you are in a good flat position.

The compact nature of the NX series adapter allows it to be placed dead centre, eliminating unwanted gas movement. Air is added and is immediately distributed equally down both sides of the wing, leaving you in perfect trim.

AN ERGONOMIC BACKPLATE

The classic backplates’ design history dates back to what could be cut out of an old road sign. For the first time since then we have looked properly at the ergonomics and anatomy of a diver’s back. Our redesign has created a plate that is better in every respect.

Enlarging the upper part of the backplate has achieved better weight distribution during the dive and removes load from the lumbar region. The lower plate design spreads the load comfortably, safely allowing for the optimal attachment of weight pockets and accessories.

The new NX Series backplate is comfortable, stable and protective of your back.

Perfect 3D mesh pad in standard

ZEN, as with any other set from the NX Series is equipped with XDEEP’s perfect 3D Mesh lining.

This soft but non-compressive pad adds to your comfort, whether in board shorts or drysuit. It helps prevent any small movement of the back plate against your back, adding to stability and security.

The 3D Mesh material does not need any additional lead due to the smart materials technology that allows easy water penetration and drainage.

V-shaped crotch strap

The NX Series harness is equipped with a totally new V-shaped crotch strap. The V shape is more comfortable, eliminating the single strap design running directly between the legs. Whether walking with your gear to jump in or scootering around a reef, you will feel the very direct benefit.

EASIER TO PUT ON AND TAKE OFF

The backplate design has resulted in major improvements in donning and doffing the system.

When the harness is unfastened, the shoulder straps are 20% longer than in a classic harness. This creates more room even if you have restricted movement in the shoulders. Tightening the buckle of the waist strap pulls the shoulder straps snugly down, perfectly tensioning the harness fit to your body. No need to adjust for changes from wetsuit to drysuit. The whole system is comfortably held closer to your body stabilising the entire scuba unit.

Modular weight system

To truly be at one with your equipment, your weight system must be perfectly balanced, be secure and easy to configure and use. The modular weight system in the NX series means you can confine your weight belt to history.

Tailor your weight distribution for the diving you are doing. From a couple of kilos needed in the warm sun, to the extra lead needed in cold water diving, you can select the pockets that best suit your needs.

Trimming weight pockets (Extra Optional)

S-size 2 x 2kg

L-size 2 x 3kg

Droppable weight pockets(Extra Optional)

S-size 2 x 2kg

M-size 2 x 3kg

XL-size 2 x 6kg